홍보관 제품 :: 지에스에이

홍보관 제품

제품코드	G026565
제품명	에어필터
모델명	HYF : Air Filter
제품분류	콤프레샤에어드라이어
사양
가격	가격협의
세금계산서	가능
거래방식
상태
판매지역	전국
A/S 여부	가능
설치 및 시운전	불가능

상세정보

? Effectively removes foreign matter and/or corrosive gas contained in the compressed air

? A float and/or a drain is equipped to remove condensate which is generated in the filter effectively

? HYF-20 or former models: float built-in

? HYF-25 or later models: HAD-20 attached

? Easy-to-replace elements

? Filters to remove 40㎛ and 5㎛ particles; oil filters of 1 ppm, 0.1 ppm, and 0.01 Fppm

? Customized design suitable for all worksites

1. Pressure gauge

A. Displays the air pressure at the filter inlet/outlet; easy to check the condition of the filters

2. Powder paint coating

A. Powder coating via static electricity that uses raw powder materials such as epoxy or polyethylene type powders; excellent corrosion resistance, and adhesive properties are better than solvent-based adhesives; durable enough to prevent corrosion

B. Durable against acids, alkali and impacts

C. Excellent waterproofing capability; rebuffs atmospheric pollution through vaporization of solvents; no risk of fire because of non-volatility

3. Drain

A. As a default, the 25A and higher models of our air filters are offered with an automatic drain to which a valve is attached.

B. Easy to inspect and clean in case of drain failures, thanks to the attached valve

4. Easy replacement

A. Simple to separate the housing and the head; easy-to-replace elements

5. Vent cock

A. A vent cock attached to the bottom of the air filter provides convenience when checking the condition of the float, as well as the state of condensate removal.

6. High pressure (customized product available upon request)

A. We ensure the reliability of our customized products which are produced upon request after sufficient pressure testing

7. Differential gauge

A. Detects the difference in in/out pressure; indicates when elements in the air filters must be replaced

8. Stainless steel bolt (optional)

A. Prevents corrosion; easy-to-replace elements

9. Inside epoxy coating

A. Epoxy coating inside the vessel prevents corrosion. (HYF-50A or higher)

Differential pressure

0.2 kg/cm²

Maximum working pressure

14.0 kg/cm²for 50A or lower

9.9 kg/cm²for 65A or higher

Appropriate inlet temperature

25℃

Maximum inlet temperature

80℃

Model
HYF -

Connection
holes

Processing flow rate [Nm³/min]

# of elements

Dimension [mm, kg]

40
μ

5
μ

1
ppm

0.1 0.01
0.01F ppm

width

depth

Weight

Note

1. The specifications listed above are subject to revision without notice for the purposes of quality improvement.

2. Stainless steel filters available.
HYF or HYE are symbols of filter models used in the selection of element models