CAMROL.CAMROL.CAMFOLLOWER 정밀 Bearing으로 규격은
아래와 같습니다. | CAMROL CAM FOLLOWER BEARINGS* |
| Series | Outer Ring
Diameter
Size Range | Sealing | Outer Race
Shape | Stud Type | Roller
Type | | CF | 1/2-10" | Unsealed
or with
Lubri-Disc Seal | Cylindrical
or
Crowned
| Standard or Eccentric
with Screw Drive Slot
or Hex Hole | Full
Comlement
| | CFH | 1/2-7 | Heavy, With Screw Drive
Slot or Hex Hole | Full
Comlement
| | CYR | 3/4-10 | N/A | Full
Comlement | | BCF-S | 1/2-4 | Standard or Eccentric
with Screw Driver Slot
or Hex Hole | Non-Metalic
Bushing
| | BCYR-S | 3/4-4 | N/A | Non-Metalic
Bushing | | MCF | 13-90(mm) | Standard or Eccentric
with Screw Driver Slot
or Hex Hole | Ful Comlement or Caged
| | MCYR | Diameter
16-90(mm) | N/A | Ful Comlement or Caged |
| All series can be relubricated. The needle roller type are supplied prelubricated with a high-grade lithium base grease having an operating temperature of-29℃ to 120℃ (-20˚F to + 248˚F) |
TRAKROL TRACK ROLLER.WIRE STRAIGHTENER AND GUIDE BEARINGS 은아래와 같습니다. |
TRAKROL TRACK ROLLER, WIRE STRAIGHTENER AND GUIDE BEARINGS* |
| Series | Roller Diameter | OD Shape | Insert Bearings
Less Than
3" Roller Diameter | Insert Bearings
3" Roller Diameter
or Greater | Seals | RCF
VCF
FCF
UCF
| 11/2-8"
31/2-81/2
11/2-8
215/16-1
thru
15/16-10
| Plain
Cylindrical
v-Grooved
Flanged
U-Grooved
Wire
Straighteners
| Heavy Duty
Ball Bearing | Tapered
Roller
Bearings | Single lip
rubber seals,
smaller sizes;
Double lip
rubber seals,
larger sizes |
*Standard operating temperature range is - 30˚F to + 255˚F
All sizes have large lubricant reservoirs for extended maintenance-free operation |
CAGEROL(MR) CAGED AND GUIDEROL(GR) CENTER-GUIDED ROLLER BEARINGS은 아래와 같습니다. |
CAGEROL(MR) CAGED AND GUIDEROL(GR) CENTER-GUIDED ROLLER BEARINGS |
Series* | Outer Race OD
Size Range | Inner Race
Bore Size | Roller Type | Application Environment
Suitability | Seal
Combinations | Cagerol
(MR) | 11/8-111/8"
| 3/8-8" | Caged | Higher Speeds,
Shaft Misalignment | NA | Cagerol
Sealed
(MR) | 11/8-51/4
| 3/8-33/4
| Caged
| For Contaminated
Application Requiring
Extended Life | | Guiderol
(GR) | 11/8-111/8
| 3/8-8
| Full
Complement
| Full Race Support
Maximum Static Caacity-Lower Range Speeds Oscillating Motion | N/A
| Guiderol
Sealed
(GR) | 11/8-51/4
| 3/8-33/4
| Full
Complement
| For Contaminated
Application Requiring
Extended Life | | MI
| Inner Race
Only
| 3/8-8
| N/A
| Hardened and Ground Steel Bushings
or Sleenes |
| *Outer ring and roller assemblies(MR)or(GR)and associated inner rings(MI)are packed and shipped separatele. Each type its own number and both outer and inner numbers should be specified when ordering a complete bearing. |
| SPHERE-ROL SINGLE ROW SPHERICAL ROLLER BEARINGS |
Series | Bore | Outside
Diameters | Sealing
Options | Feature
Options | 222000 | .5906-5.9055"
15-150mm | 1.3780-10.6299"
35-270mm | Unsealed,
NYLAPLATE or
LAMBDA | Tapered Bore
Expansion Type,
Choice of
Diametral
Clearance |
AIRCRAFT TRACK ROLLER AND HOUSING MOUNTED AIRFRAME BEARINGS은
다음과 같습니다. |
AIRCRAFT TRACK ROLLER AND HOUSING MOUNTED AIRFRAME BEARINGS |
Series | Military
Standard Number
MS* | Bore Size | Outer Ring OD
Size Range | Sealing
Option | Relubrication | Plating | NBF | 24465 | .1900-2.7500" | .7500-5.000" | Unsealed | Y | Exposed Surfaces of
Outer Bore are
Chrom Plated
Other Exposed
Surfaces as Mounted,
Cadmium Plated | NBL
|
24466
|
.3750-2.0000
| 1.1250-3.8750 .
| Unsealed
| Y
| AFC
| 21438
|
.1900-2.7500
|
7500-5.000
| LUBRI-DISC
Seals | Y
| AL
|
21439
| .3750-2.0000
|
1.12500-3.8750
| LUBRI-DISC
Seals | Y
| NBE
|
24463
| .1900-.3125
| .8750-1.0625
| Unsealed
| Z
| External Surfaces
Except Bore are
CadmiumPlated,
Surfaces of Outer Ring are Chrome Plated. Remaining
Exposed Surfaces
are Cadmium Plated
| NBK | 24464 | .3750-3.5000 | 1.1875-4.8450 | Unsealed | YZ | NBC | 24461 | .1900-4.0000 | .6875-4.8750 | LUBRI-DISC
Seals | YZ | HRS
Cylindrical
OD | 21432 | Integral Stud | .5000-1.1250 | RS Type
Labyrinth | Flange or
Threaded End | CHRS
Crowned
OD
| 21447
| Integral Stud
| .5000-1.1250
| RS Type
Labyrinth
| Flange or
Threaded End
|
Y=Annular lubrication groove in bore and oil holes in inner ring
Z=Annular lubrication groove on OD and holes in outer ring |
|
|
