| 제품코드 | G153990 | ||
|---|---|---|---|
| 제품명 | 저압 미세 물리 발포 Hybrid 사출성형기 | ||
| 모델명 | SFV (1800ton, 2400ton) | ||
| 제품분류 | SFV | ||
| 사양 | C-프레임 수직 절전형 미세물리발포 성형기 | ||
| 가격 | 가격협의 | 세금계산서 | 가능 |
| 상태 | 신품 | 판매지역 | 전국 |
| A/S여부 | 가능 | ||
| 설치 및 시운전 | 가능 | ||
제품/가격 문의
(주)우진플라임: 0504-0667-5356
상세정보
SFV(2400ton) 저압(~10Mpa) 미세 물리 발포 기술을 적용한 Hybrid 방식의 사출성형기 .
C-frame 방식의 유압식 형체장치부에 전동식 턴테이블,
Full electric 방식의 사출장치 멀티 스테이션 (Multi-station) 금형 부착이 가능한 발포성형 전용 특수기.
- 경량화 : 용융 수지와 물리발포 Gas의 비율을 조절하여 3~60% 발포성형
- 원가절감 : 성형 시 소요되는 원재료의 양을 줄여 적은 양의 원재료로 제품생산
- 생산성 향상 : “보압공정”이 생략되므로 전체공정시간(Cycle time)을 단축
- 에너지 절감 : 일반사출 대비 낮은 히터온도, 형체&사출압력 사용으로 에너지절감
- 비용 절감 : 저압(~10Mpa)의 물리발포를 사용하므로 별도의 제어장치 불필요. 또는 스크류 및 배럴에 가해지는 마찰력이 적어 유지보수 비용 절감
Hybrid injection molding machine using low-pressure (~10Mpa) micro-physical foaming technology. Special foaming molding machine with electric turntable, full electric injection device, multi-station mold attachment to C-frame type hydraulic molding device. (2400ton)
- Lightweight: 3~60% foaming molding by adjusting the ratio of molten resin and physical foaming gas
- Cost reduction: Reduce the amount of raw materials required for molding, and produce products with a small amount of raw materials
- Productivity improvement: Shorten the total process time (cycle time) by omitting the “pressure process”
- Energy saving: Energy saving by using lower heater temperature, molding & injection pressure compared to general injection
- Cost saving: No separate control device is required because low-pressure (~10Mpa) physical foaming is used. Or, maintenance costs are reduced due to less friction applied to the screw and barrel.
판매자 정보
- (주)우진플라임
- 우진플라임
- 0504-0667-5356
- http://www.woojinplaimm.com/
- info@wjpim.com
- 충북 보은군 장안면 우진플라임로 100 (봉비리)